YAMAHA BANSHEE 10MM STROKER CRANKSHAFT W/115 LONG RODS WITH 10 & 8 BALL BEARINGS
Forged 10mill stroker crankshaft.
115mm long rods.
Upper and lower rod bearings are high quality silver caged.
Trued and welded.
We installed a 10 ball max load bearing on the flywheel side and a heavy duty Koyo C3 8 ball bearing on the clutch side for better strength. The flywheel side of the crankshaft has a lot of stress due to the weight of the flywheel.
We inspect every crank for proper rod clearance.
Center webs are pinned so crank won't twist out of phase.
This is not a drop in crankshaft case modifications are needed. Case trenching to the depth of .100" will be required.