DRIVELINE BANSHEE ENGINE CASES-CUB PORTED

These are our new die cast Driveline Banshee cases that we have been developing for the last 5 years. We have made a lot of changes to the OEM design while still retaining the stock look. We have added extra material in all the places the stock cases were lacking for today's larger stroke cranks and aftermarket cylinders. You can trench these cases up to a 14mm stroke without any epoxy or welding. The top case can be bored and machined to fit a DM cylinder and not break through on the sides of the transfers. 

We offer the cases untrenched which will fit a stock stroke crank or a 4 mill crank. You can fit a stock cylinder or any 68mm aftermarket cylinder and have a lot more top gasket sealing area compared to OEM especially with cub, or serval cylinders that have larger transfer areas.

This set of cases has been CNC ported to match the Cub, Serval, or Wampus transfer shape. 

You could also use these cases on a ported stock cylinder set-up.  

The folllowing items are included with every case set: